STAR V MACHINERY'S Model SLG-1LB Linear V-Groover is designed to v-groove various wood materials, wood composites or plastics such as solid surface. V-Folds to create a build-up front edge, cove back splash profile, scribe strip, dado for back panel, double edge shelving etc. Other v-groove angles besides the standard 90° can easily be employed.
The tape, which acts as the hinge for miter folding, is applied automatically and cut to length. The feeder belt moves the material over the high-precision, stainless steel roller table, which minimizes friction and reduces or eliminates marring of the material. The v-groove is being applied from above. Both linear as well as cross cuts up to 14-16" away from the fixed fence are possible. Set-up controls are manual.
STAR V MACHINERY, Model SLG-1LB Linear V-Groover
(1) Spindle with 10 HP-3,600 RPM motor, 14" throat capacity 30 mm spindle x 3" clamping length with 8mm single keyway, 9-1/2" max. diameter cutter head, ¼" to 1-1/8" material thickness, board width from 6" min. to no max. width restrictions, min. board length approx. 20", unlimited length of part when cross grooving with optional omni-directional roller ball table,
6" diameter solid aluminum reference roller in cutting area.
Grooving head is mounted on heavy duty overhead beam of 6" x 8" x ½" thick, heat-treated steel, head side movement via hand crank on linear rail & bearings on precision machined beam; and ACME thread screw, digital readout scale pneumatic lock of head positioning, head height adjustment on linear rail & bearings, manual fine tuning via ACME screw with dial indicator gauge (inch or metric scale) with o backlash.
Dust collection requirements 700 CFM, 3" diameter dust chute on cutter guard, compressed air requirements 80 PSI